Contract Law

Contract Law for Cross-Border Commercial Deals

A Turkish subsidiary's contracts — with its distributors, suppliers, landlords and customers — sit under the Turkish Code of Obligations, even when the parties negotiated the deal entirely in English. A few local rules routinely surprise foreign drafters.

Contract formation basics

The Turkish Code of Obligations follows the same core logic most European civil-law systems use: a contract forms on offer and acceptance, does not generally require a specific form (written contracts are the exception, not the rule, though strongly advisable), and is interpreted first by the parties' actual common intent rather than the literal wording alone. Certain contracts do require a specific form to be valid — real estate sale/transfer, suretyship (guarantee) undertakings, and a handful of others — and getting the form wrong can make an otherwise carefully negotiated clause unenforceable.

Pre-contractual conduct also carries legal weight: negotiating in bad faith, or breaking off advanced negotiations without a legitimate reason after leading the other side to reasonably rely on a deal closing, can itself give rise to a claim for reliance-interest damages (culpa in contrahendo) even where no contract is ever signed. Foreign parties used to a "no deal, no liability" negotiation culture should be aware that Turkish law does not treat pre-contractual dealings as entirely risk-free.

TCO Art. 583

A personal guarantee (kefalet) is only valid if given in writing, with the guaranteed maximum amount and the guarantee's duration stated by the guarantor in their own hand or otherwise as the Code requires — a formality foreign parent companies often miss when asked to guarantee a subsidiary's lease or credit line.

Standard terms and adhesion clauses

Where one party presents pre-printed general terms and conditions that the other did not individually negotiate, the Code applies a protective regime: clauses that are unusual or surprising given the contract's nature, or that the other party could not reasonably have expected, are not binding unless specifically drawn to their attention and accepted; and clearly unfair terms can be struck down as contrary to good faith. This regime was designed with consumer contracts in mind but reaches B2B standard-form contracts too, so a foreign supplier rolling out its global terms and conditions in Turkey should have them reviewed for enforceability, not just translated.

In practice, the clauses most likely to be treated as "surprising" and struck down are broad limitation-of-liability language buried in dense boilerplate, unilateral variation rights, and automatic-renewal terms with very short opt-out windows — precisely the clauses that tend to survive unchallenged in common-law standard forms. A Turkish-language, clearly formatted version of any global template, with the genuinely important departures from statutory default rules called out rather than buried, holds up far better if tested.

Distribution, agency and franchise agreements

These are the contracts foreign investors negotiate most often when entering the Turkish market without setting up their own retail or sales operation:

Whichever structure is used, the agency indemnity right under TCC Art. 122 cannot be waived in advance — a clause in the original contract stating the agent or distributor gives up any indemnity claim on termination is void, though a settlement reached genuinely after termination, with independent legal advice, can validly extinguish the claim. Foreign principals sometimes discover this the hard way when a termination agreement drafted under the group's standard global template turns out not to survive a Turkish court's scrutiny of when the waiver was actually signed.

Recent development · July 2026

As of Law No. 7589 (31 July 2026), Turkey's statutory legal interest rate is no longer a fixed 24% — it now floats at 80% of the Central Bank's reeschount rate. Any contract that relies on the statutory default rate (rather than specifying its own interest rate) is affected. Read the full update →

Sale of goods, financial leasing and other common contract types

Beyond distribution and agency, two contract types come up more often than any others in a foreign-owned Turkish company's day-to-day commercial activity: the international sale of goods agreement and, for companies financing equipment or machinery, the financial leasing agreement. Turkish legal practice on structuring these — and on drafting international commercial contracts in English generally — is well covered in the Turkish legal literature; Prof. Dr. Ziya Akıncı's İngilizce Sözleşmelerin Hazırlanması ("Drafting Contracts in English," On İki Levha Yayıncılık, 2024) is a leading practical reference on exactly this subject, working through the general clauses common to every international contract before treating the most frequently used contract types — including the sale of goods and agency agreements — individually, each with the type-specific clauses a foreign party should expect to negotiate.

International sale of goods agreements

Turkey has been a party to the United Nations Convention on Contracts for the International Sale of Goods (CISG) since 2011. Unless the parties expressly exclude it, the CISG applies by default to a sale of goods contract between parties whose places of business are in different CISG member states — which covers a large share of the cross-border sale contracts a Turkish company signs with foreign suppliers or customers, whether or not the contract says so. The CISG supplies default rules on formation, conformity of the goods, the seller's and buyer's remedies for breach, and passage of risk — often without the parties realizing it governs unless they have turned their mind to excluding or supplementing it.

In practice, a well-drafted international sale of goods agreement for a Turkish party addresses:

Model form

ICC Model International Sale Contract (ICC Publication No. 738E, most recently updated 2024) — published by the International Chamber of Commerce specifically for manufactured goods intended for resale under the CISG, with Specific Conditions the parties complete for their own transaction sitting alongside a set of ready-made General Conditions. It remains the most widely used starting template for a CISG-governed sale contract worldwide, including in Turkish export/import practice.

Parties who want a neutral governing framework beyond the CISG's own scope (which does not cover, for example, contract validity or the effect on third-party property rights) sometimes also incorporate the UNIDROIT Principles of International Commercial Contracts (PICC) 2016 — a widely referenced, non-binding restatement of international contract law discussed in full, along with the other transnational trade rules built on the same idea, later in this guide.

Sample clause · Delivery and risk transfer

9.1  Delivery shall be made [FOB İzmir, Incoterms® 2020]. Risk of loss of or damage to the Goods shall pass from Seller to Buyer in accordance with the named Incoterms rule, and title shall pass upon Seller's receipt of payment in full pursuant to Article 6.

9.2  Seller shall notify Buyer of the estimated shipment date not less than ten (10) Business Days prior to the intended date of loading, and shall promptly notify Buyer of any anticipated delay.

Illustrative only — the bracketed Incoterms rule, port, and notice period should be adapted to the specific shipment and checked against the delivery obligations that rule actually imposes.

Incoterms® 2020 rules in practice

Naming an Incoterms rule without understanding what it actually allocates is one of the most common drafting errors in Turkish export/import contracts. The eleven Incoterms 2020 rules split into two groups: seven that work for any mode of transport (including multimodal and containerized cargo, which covers most general trade), and four reserved for sea and inland waterway transport only — using a sea-only rule for a container shipment that never touches the ship's rail is a frequent and consequential mistake, since it can leave a gap over exactly when risk actually passes.

RuleFull nameRisk passes to buyer when…Main carriage & insurance
Any mode of transport
EXWEx WorksGoods are placed at buyer's disposal at seller's premisesBuyer arranges and pays for everything from seller's door onward
FCAFree CarrierGoods are handed to the carrier nominated by buyer at the named placeBuyer arranges main carriage; insurance optional for either party
CPTCarriage Paid ToGoods are handed to the first carrier (not on arrival)Seller pays carriage to named destination; insurance optional
CIPCarriage and Insurance Paid ToGoods are handed to the first carrier (not on arrival)Seller pays carriage and must insure to Institute Cargo Clauses (A) level
DAPDelivered at PlaceGoods arrive ready for unloading at the named destinationSeller arranges carriage; buyer handles unloading and import clearance
DPUDelivered at Place UnloadedGoods are unloaded at the named destinationSeller arranges carriage and unloading; the only rule requiring seller to unload
DDPDelivered Duty PaidGoods arrive ready for unloading, import-clearedSeller bears maximum obligation: carriage, import duties and taxes
Sea and inland waterway transport only
FASFree Alongside ShipGoods are placed alongside the vessel at the named portBuyer arranges main carriage and insurance
FOBFree on BoardGoods are loaded on board the vesselBuyer arranges main carriage; insurance optional for either party
CFRCost and FreightGoods are loaded on board (not on arrival)Seller pays freight to destination port; insurance optional
CIFCost, Insurance and FreightGoods are loaded on board (not on arrival)Seller pays freight and must insure to Institute Cargo Clauses (C) minimum

Note the recurring pattern across CPT, CIP, CFR and CIF: the seller pays for carriage (and sometimes insurance) to the named destination, but risk still passes much earlier — at origin, when the goods are handed to the first carrier or loaded on board. Buyers who assume "seller pays freight" means "seller bears risk until arrival" are reading these four rules wrong, and it is a genuinely common misreading in practice.

Always cite the Incoterms version year ("Incoterms® 2020") and a precise named place or port — "FOB" alone, without a named port, or without specifying which Incoterms edition applies, leaves real ambiguity that the CISG's own default rules will not fully resolve.

Financial leasing agreements

Financial leasing (finansal kiralama) is a common way to finance equipment, machinery, or capital goods in Turkey without an outright purchase, and is used by foreign-owned manufacturing and industrial subsidiaries as often as by Turkish-owned companies. It is governed by a dedicated statute, the Financial Leasing, Factoring and Financing Companies Law No. 6361, rather than by the Code of Obligations' ordinary lease provisions — a structural difference from an operating lease that affects both the parties' rights and how a dispute over the arrangement is resolved.

Under a financial lease, the lessor (a licensed leasing company) purchases the asset the lessee has selected and leases it to the lessee for a fixed term in exchange for periodic payments, typically with an option (though not always an automatic right) for the lessee to purchase the asset at the end of the term for a nominal price. Because the lessor retains legal ownership of the asset throughout the lease term, a financial lease gives a lessor a stronger practical security position than an ordinary secured loan against the same equipment — the lessor can reclaim its own asset on default rather than having to enforce a security interest against the lessee's.

Law No. 6361, Art. 30

A lessor may terminate for the lessee's payment default only after giving the lessee a 30-day cure period following notice (extended to 60 days where the contract provides for ownership to pass to the lessee at the end of the term), and may also terminate where the lessee fails to pay two consecutive instalments, or three instalments within a single year, after having been given notice for each. A separate right of termination is available under Art. 31/2 for any other breach serious enough that continuing the contract cannot reasonably be expected of the terminating party.

On termination, Law No. 6361 requires the lessee to return the leased asset; where the lessor terminates for the lessee's default, the lessee remains liable for unpaid instalments and any additional loss the lessor suffers beyond the value of the returned asset — a foreign lessee should budget for this exposure rather than assuming return of the equipment closes out the relationship. Unlike the leasing law that preceded it, Law No. 6361 removed the earlier fixed minimum non-cancellable term and the earlier statutory minimum value for cross-border leases from abroad, giving the parties more flexibility to structure the term and (subject to the Financial Leasing Association's own procedural rules for leases funded from outside Turkey) the leasing arrangement itself than under the prior regime.

Sample clause · Default and termination

14.1  If Lessee fails to pay any Rental when due and such failure continues for thirty (30) days after Lessor's written notice thereof (or sixty (60) days where ownership of the Equipment is to pass to Lessee upon expiry of the Term), Lessor may terminate this Agreement pursuant to Article 30 of Law No. 6361 and demand the immediate return of the Equipment.

14.2  Upon termination under this Article 14, Lessee shall (a) return the Equipment to Lessor in the condition required under Article 8, (b) remain liable for all Rentals accrued and unpaid as of the date of termination, and (c) indemnify Lessor for any loss in excess of the value of the returned Equipment, in accordance with Article 33 of Law No. 6361.

Illustrative only — the notice period, cure period, and indemnity language must track the mandatory minimums in Law No. 6361 Art. 30 and 33 described above; a shorter cure period than the statute allows will not be enforceable.

International framework

The UNIDROIT Convention on International Financial Leasing (Ottawa, 28 May 1988) is the leading international uniform-law instrument for cross-border equipment leasing, and remains the standard reference point for how international leasing practice allocates risk between lessor, lessee and supplier. Turkey has not ratified this Convention, so a Turkish leasing transaction is governed by Law No. 6361 and the parties' own contract rather than by the Convention directly — but foreign lessors financing equipment into Turkey, and their counsel, frequently still draft against its concepts and terminology, since it reflects broadly accepted international market practice and many of Turkey's trading partners' own leasing laws are themselves modeled on it.

Licensing agreements

A licensing agreement grants a licensee the right to use intellectual property owned by the licensor — a trademark, a patent, know-how, or software — usually in exchange for a royalty. For a foreign group, the most common structure is the parent company licensing its trademark and/or technical know-how to its own Turkish subsidiary, both to formalize the group's IP protection in Turkey and to establish a defensible royalty flow between the companies for transfer-pricing purposes (see the tax law guide). A standalone license to an unrelated Turkish licensee — for local manufacturing or distribution under the licensor's brand — raises the same core issues with added emphasis on quality control and territorial exclusivity.

Turkish-specific points that recur in licensing negotiations:

Sample clause · Grant of license and royalty

3.1  Licensor grants to Licensee a non-exclusive, non-transferable, royalty-bearing license to use the Licensed Marks in the Territory solely in connection with the manufacture, marketing and sale of the Licensed Products.

3.2  In consideration of the license granted under Article 3.1, Licensee shall pay Licensor a royalty equal to [•]% of Net Sales of Licensed Products, payable quarterly in arrears, exclusive of any Turkish withholding tax, which Licensee shall be entitled to deduct and remit to the extent required by applicable law.

Illustrative only — the royalty rate and payment mechanics should be set at arm's length and documented to withstand transfer-pricing scrutiny where the parties are related.

Reference resources

Unlike sale of goods or joint ventures, there is no single dominant international model licensing agreement — royalty structures, field-of-use restrictions and quality-control mechanics are too specific to each technology and industry to standardize into one form. The World Intellectual Property Organization (WIPO) nonetheless publishes widely used practical guides and model clauses on technology licensing (including through its IP Panorama and licensing toolkit materials), and the Licensing Executives Society International (LES) is the leading professional body whose members' published materials and standard clause libraries are commonly consulted when structuring a cross-border technology or trademark license.

Joint venture agreements

A joint venture between a foreign investor and a Turkish partner is almost always implemented through a Turkish company (an LLC or JSC, see the corporate law guide) with a separate joint venture or shareholders' agreement layered on top, governing matters the articles of association alone typically do not resolve in enough detail: board composition and reserved matters requiring more than a simple majority, funding obligations if the venture needs additional capital, transfer restrictions and pre-emption rights, and — critically — what happens if the partners reach a genuine impasse.

Deadlock mechanisms deserve particular attention in a Turkish joint venture, since Turkish corporate law's default minority-protection rules (discussed in the corporate law guide) do not, on their own, resolve a 50/50 shareholder standoff. Common mechanisms include escalation to each side's senior executives, a put/call option triggered by deadlock, or — as a last resort — a Russian roulette or shotgun clause forcing one side to buy the other out at a price it names, with the other side entitled to choose whether to buy or sell at that price.

Sample clause · Deadlock resolution

7.4  If the Board is unable to reach agreement on a Reserved Matter within thirty (30) days of it first being tabled, either Shareholder may refer the matter to the chief executives of the Parties for resolution in good faith (a "Deadlock").

7.5  If a Deadlock is not resolved within a further thirty (30) days, either Shareholder (the "Offeror") may serve notice on the other specifying a price per Share at which the Offeror is willing either to buy all of the other Shareholder's Shares or to sell all of the Offeror's own Shares, and the other Shareholder shall elect, within twenty (20) Business Days, to buy or sell at that price.

Illustrative only — a shotgun/Russian-roulette mechanism should be used with care where the parties have materially unequal financial resources, since the wealthier party can use it coercively.

Model form

ICC Model Contract – Joint Venture (ICC Publication No. 780E, 2018 Edition), published by the International Chamber of Commerce, is the most widely referenced standard template for structuring an international joint venture, covering governance, funding, deadlock and exit mechanics of the kind illustrated above in a form drafters worldwide use as a starting checklist even when the final agreement departs from it significantly to fit Turkish company law.

Factoring agreements

Factoring — the sale of a company's trade receivables to a factor (typically a licensed factoring company) in exchange for immediate cash, usually at a discount — is regulated under the same Law No. 6361 as financial leasing, and is used by foreign-owned Turkish subsidiaries mainly to accelerate cash flow from receivables owed by their own Turkish customers, or, in export factoring, receivables owed by foreign buyers. Factoring can be structured with or without recourse to the seller if the debtor fails to pay, which fundamentally changes who bears the credit risk and should be stated unambiguously in the agreement rather than left to be inferred from the discount rate.

The mechanics that matter most in a Turkish factoring agreement are the notice of assignment to the account debtor (without which the debtor may validly discharge its obligation by paying the original seller instead of the factor) and the recourse/non-recourse allocation of credit risk described above.

Sample clause · Assignment and notice

2.1  Seller hereby assigns and sells to Factor, and Factor hereby purchases, all of Seller's right, title and interest in and to the Receivables listed in each Schedule delivered under this Agreement, together with all related rights of payment.

2.3  Seller shall ensure that each invoice relating to an assigned Receivable bears a notice of assignment, in the form set out in Schedule 2, directing the relevant Debtor to make payment exclusively to Factor's designated account.

Illustrative only — whether the factoring is with or without recourse should be stated as an explicit, separate clause, not left to be inferred from the discount rate or notice provisions.

International framework

The UNIDROIT Convention on International Factoring (Ottawa, 28 May 1988) supplies uniform rules on the assignment of receivables and the debtor's obligation to pay the factor once notified — but, as with the leasing Convention above, Turkey has not ratified it. What actually governs the mechanics of cross-border factoring in practice worldwide, including for Turkish factoring companies operating under the "two-factor system," is the Factors Chain International (FCI) General Rules for International Factoring ("GRIF") — a privately administered rulebook that correspondent factors in different countries contractually adopt between themselves to allocate risk and standardize notice and payment mechanics, and the de facto global standard for how international factoring actually operates.

EPC and construction contracts

Engineering, procurement and construction (EPC) contracts for industrial plants, energy facilities, and infrastructure are among the highest-value contracts foreign investors sign in Turkey, and are almost always built on an international standard form — most often a FIDIC form (Yellow Book for plant and design-build, Silver Book for EPC/turnkey projects) — adapted for Turkish law, Turkish tax withholding on construction and installation work, and, where the employer is a public entity, Turkish public procurement rules that sit alongside or in place of the standard form's own dispute and variation mechanisms.

The clauses that generate the most disputes on Turkish projects are consistent with international experience generally: extension-of-time and force majeure provisions (particularly relevant given Turkey's exposure to seismic risk, which is often the subject of its own specific contractual treatment), liquidated damages for delay capped at a percentage of the contract price, and the taking-over/completion certificate mechanics that trigger the shift from the contractor's to the employer's risk.

Sample clause · Delay liquidated damages

11.1  If the Contractor fails to achieve Substantial Completion of the Works by the Time for Completion, the Contractor shall pay to the Employer liquidated damages in the amount of [•] per day of delay, up to the maximum amount set out in Appendix 3, as the Employer's sole and exclusive remedy for such delay, other than in the case of fraud or wilful misconduct.

Illustrative only — a liquidated damages cap set unrealistically low relative to the employer's actual exposure is one of the most common and costly drafting errors on Turkish EPC projects; and see the contract law discussion above on how Turkish courts review penalty-type clauses for proportionality.

Model forms

The FIDIC suite of standard forms, published by the International Federation of Consulting Engineers (Fédération Internationale des Ingénieurs-Conseils, Geneva), is by far the most widely used family of international construction contracts on Turkish and international projects alike, most recently in its 2017 Second Editions:

Red Book (Conditions of Contract for Construction) — employer-designed works, contractor builds to the employer's design.
Yellow Book (Plant and Design-Build) — contractor designs and builds, common for process plant and power projects.
Silver Book (EPC/Turnkey Contract) — maximum price and time certainty for the employer, with design risk shifted most heavily onto the contractor; the form most often seen on foreign-investor-financed turnkey projects in Turkey.
Green Book (Short Form of Contract) — simpler works of lower value or shorter duration not justifying the full-length forms above.

UNIDROIT Principles and other transnational trade rules

Beyond CISG and Incoterms, a small set of privately drafted rulebooks and restatements has become so widely incorporated into international contracts that they function as a practical global standard even though no state has "enacted" them as law. A foreign investor's Turkish contracts touch at least one of these far more often than most people realize — anyone who has opened a letter of credit, given a bank guarantee, or negotiated a governing-law clause described as "general principles of international commercial law" has already dealt with this body of rules, usually without it being labelled as such.

UNIDROIT Principles of International Commercial Contracts (PICC)

Published by the International Institute for the Unification of Private Law (UNIDROIT) in Rome, the UNIDROIT Principles are a restatement of general contract law drafted by an international working group of scholars and practitioners, first issued in 1994 and most recently updated in 2016. They are not a treaty and bind no one automatically — their authority comes entirely from how parties, arbitrators and courts choose to use them, in three main ways:

Substantively, the Principles cover formation, validity, interpretation, performance and non-performance, and are particularly well known for provisions many national laws (including, historically, common-law systems) lacked in a codified form: a general good-faith obligation, hardship (changement de circonstances) allowing renegotiation or judicial adjustment where performance becomes excessively onerous, and a structured approach to interest and the assessment of damages.

UCP 600 — documentary credits

The Uniform Customs and Practice for Documentary Credits ("UCP 600"), ICC Publication No. 600, in force since 1 July 2007, is the rulebook almost every letter of credit issued anywhere in the world is made subject to — including the documentary credits discussed in the payment-mechanism section above. Banks and exporters do not negotiate these terms afresh for each transaction; they simply state that the credit "is subject to UCP 600," incorporating decades of standardized practice on document examination, the doctrine of strict compliance (documents must conform to the credit's terms on their face, exactly, for the bank to be obliged to pay), and the banks' own examination timelines.

Sample clause · Incorporation of UCP 600

6.3  Any documentary credit opened pursuant to this Agreement shall be subject to the Uniform Customs and Practice for Documentary Credits, 2007 Revision, ICC Publication No. 600 ("UCP 600"), as in force on the date the credit is issued.

URC 522 — documentary collections

The Uniform Rules for Collections ("URC 522"), ICC Publication No. 522, in force since 1 January 1996, performs the same standardizing function for cash against documents / cash against acceptance transactions — the payment mechanism described earlier in this guide, where a bank releases shipping documents to the buyer only against payment or acceptance of a bill of exchange, without providing the payment guarantee a letter of credit gives. Since collections leave the seller more exposed to buyer non-payment than a documentary credit, URC 522's main practical value is standardizing the collecting bank's and remitting bank's respective duties and the notice each must give the other, reducing disputes over who bears a delay or a lost document in the chain.

URDG 758 — demand guarantees

The Uniform Rules for Demand Guarantees ("URDG 758"), ICC Publication No. 758, in force since 1 July 2010, governs bank guarantees payable on the beneficiary's simple demand (with or without a supporting statement of default) — the instrument most often used as a performance bond, advance-payment guarantee, or retention guarantee on the EPC and construction contracts discussed earlier in this guide. A demand guarantee subject to URDG 758 is deliberately independent of the underlying contract: the guarantor bank must pay on a compliant demand regardless of any dispute between employer and contractor over whether a default actually occurred, which is precisely why employers on Turkish infrastructure and industrial projects favor it and why contractors negotiate hard over the guarantee's expiry and reduction mechanics.

Regional counterpart

Europe has its own restatement, the Principles of European Contract Law (PECL), produced by the Lando Commission and a direct influence on the UNIDROIT Principles' own drafting. PECL is rarely chosen as governing law outside Europe and is used mainly as an academic and legislative reference (including in the EU's later Draft Common Frame of Reference project) rather than as a live drafting tool — in practice, a foreign investor's Turkish contracts are far more likely to encounter the UNIDROIT Principles and the ICC rules above than PECL.

Read the official full texts

Each instrument above is a copyrighted work of the institution that publishes it, so we link directly to the official source rather than reproducing the text here — this also means you are always reading the current, authoritative version rather than a copy that may fall out of date.

InstrumentPublisherWhere to read the full official text
CISG (1980)UNCITRAL (United Nations)uncitral.un.org — official UN treaty text, freely published
UNIDROIT Principles (2016)UNIDROIT, Romeunidroit.org — full text published free of charge by UNIDROIT itself
Incoterms® 2020ICC, Parisiccwbo.org — rule summaries free; full official text sold as an ICC publication
UCP 600 / URC 522 / URDG 758ICC, Parisstore.iccwbo.org — sold as official ICC publications; not freely published in full
UNIDROIT Leasing & Factoring Conventions (1988)UNIDROIT, Romeunidroit.org — official convention texts published free of charge

Where a text is sold rather than freely published, that is the publishing institution's own commercial policy, not a restriction we are imposing — the summaries throughout this guide are written independently, in our own words, precisely so you can understand how each instrument works without needing to purchase it first.

Penalty clauses and limitation of liability

Turkish law recognizes contractual penalty clauses (cezai şart) as a normal and enforceable way to pre-agree damages for breach or delay — a useful tool foreign drafters coming from common-law systems (where "penalty clauses" are traditionally suspect) sometimes under-use. The important local wrinkle: a Turkish court has the power to reduce an excessive (fahiş) penalty of its own motion where the debtor is not a merchant, and on request where the debtor is a merchant, if the amount is disproportionate to the actual harm — so an aggressively high penalty is not automatically what it says on paper. Merchants are held to a stricter standard than consumers or ordinary individuals — the Turkish Commercial Code denies a merchant-debtor the ordinary right to request a reduction simply because a penalty is disproportionate, reserving relief for the narrower case where paying it in full would cause the merchant's genuine economic ruin.

Limitation-of-liability clauses are generally enforceable, but a clause excluding liability for gross negligence or intentional breach is void, and exclusions in standard-form terms are read narrowly.

Choice of law in international contracts

Parties to a contract with a foreign element (a foreign party, foreign performance, or similar) may generally choose a foreign governing law under Turkey's private international law rules, and Turkish courts and arbitral tribunals will normally respect that choice. Two practical qualifications matter for foreign investors:

In practice

For a Turkish subsidiary's day-to-day commercial contracts — leases, local supply, distribution to Turkish customers, employment — drafting under Turkish law with a Turkish-language governing text is usually simpler to enforce than importing a foreign-law template, even when the foreign parent's global contracts are written in English under, say, English or New York law.

Dispute resolution clauses

A well-drafted cross-border commercial contract should say, expressly, where and how disputes are resolved. Turkish parties and foreign investors alike increasingly choose institutional arbitration — including the Istanbul Arbitration Centre (ISTAC) — for cross-border commercial contracts, since an arbitral award is generally easier to enforce internationally (through the New York Convention, to which Turkey is a party) than a foreign court judgment. Litigation before the Turkish commercial courts remains the default where no arbitration clause is agreed, and is often the more practical choice for straightforward domestic disputes such as unpaid invoices. See the dispute resolution guide for how mandatory mediation now fits in front of most commercial claims, and how enforcement of a foreign judgment or award actually plays out.

Landmark Case Law

How Turkish courts read penalty clauses and dealer terminations

Four decisions that show how far a penalty clause actually reaches, and how the agency indemnity doctrine follows the economic substance of a dealership relationship rather than its label.

Yargıtay Hukuk Genel KuruluEsas 2013/13-1108 · Karar 2014/76815.10.2014
How a Turkish court decides whether a penalty clause is "excessive"

The General Assembly of Civil Chambers held that whether a penalty is excessive must be judged against the parties' economic circumstances, the debtor's ability to pay, the reasonable and fair balance between the benefit the creditor would have gained from proper performance and the benefit of collecting the penalty, the actual harm the creditor suffered from the breach, the benefit the debtor gained by not performing, and the degree of the debtor's fault and the severity of the breach. On that multi-factor basis, courts must arrive at an amount consistent with equity and fairness, and a judge's discretion in doing so must rest on grounds a higher court can actually review.

This is the framework Turkish courts still apply whenever a penalty clause in a commercial contract is challenged as disproportionate — worth knowing when setting penalty levels in supply, construction, or distribution agreements with Turkish counterparties.
Yargıtay 19. Hukuk DairesiEsas 2006/10269 · Karar 2007/32052007
Merchants generally cannot ask a court to reduce a penalty as excessive — except where it would cause economic ruin

Applying Article 24 of the (former) Commercial Code, the court confirmed that a debtor holding merchant status cannot, as a rule, ask a court to reduce a fee or penalty on the ground that it is excessive. It recognized a narrow exception, however: where the penalty is so heavy that paying it would amount to the merchant's economic ruin, it may be found contrary to public morals and reduced or annulled in whole or in part.

Foreign companies contracting with Turkish merchant counterparties should know that the usual 'excessive penalty' defense is largely closed to a merchant-debtor — full recovery of an agreed penalty is the norm, not the exception, unless the debtor can show the payment would destroy its business.
Yargıtay 11. Hukuk DairesiEsas 2015/13042 · Karar 2017/134207.03.2017
An agent is not automatically entitled to indemnity just because the principal terminated without fault

The court reiterated that all of the statutory conditions for an agent's equalization/goodwill indemnity under TCC Art. 122 must be met cumulatively — including that the agent brought the principal significant new customers or substantially expanded existing business, and that the principal continues to derive meaningful benefit from that portfolio after termination. Where the agent cannot show it created lasting value for the principal, the indemnity claim fails even if the termination itself was not attributable to the agent's fault.

A useful counterweight for foreign principals: the agency/distribution indemnity is real, but it is not an automatic termination tax — it depends on the agent actually having built transferable customer value the principal keeps benefiting from.
Yargıtay 11. Hukuk DairesiEsas 2015/11288 · Karar 2016/679417.06.2016
Distribution agreements can attract the agent's indemnity right by analogy

Where a distribution (sole-dealer) agreement was terminated without just cause and the statutory conditions were otherwise satisfied, the court upheld a lower-court award of equalization indemnity, applying TCC Art. 122 — which by its own terms (Art. 122/5) extends to distributorships and similar exclusive, continuing dealership arrangements where equity so requires.

Confirms that a distribution agreement, though not itself a named contract type, is not a safe way to avoid the agency indemnity regime — termination provisions for Turkish distributors should be drafted with TCC Art. 122 in mind, not around it.

Case summaries above are Salik Avukatlik Burosu's own English paraphrase of the published holding, prepared for general orientation. They are not certified translations and should not be quoted as the court's original wording; always verify against the full Turkish-language decision (Esas/Karar numbers as cited) before relying on it in a filing.

Continue reading
WhatsApp